| Article group | Modular Press Seal |
| Item number | CRA21300V2A |
| EAN / GTIN | 4260391377259 |
| Designation | Modular Seals Type CS GK-200, EPDM |
| Product description | Annular seal in modular design: For installation in core bores, casing pipes or pipes; for the passage of various media (pipes, cables, etc.); simply sealing; resistant to both pressurized and non-pressurized water; modular design ideally suited for retrofit installation; various elastomer qualities and screw qualities available depending on the application area; UV and weather-resistant material. |
| R | Annular gap | 12.5-15.9 mm |
| M | Media pipe | 21.3-323.9 mm |
| B | Thickness | 40 mm |
|
| Pressure density | 5.0 bar / 72.5 PSI |
| Tightening torque | 3.0 Nm |
| Weight | 0.022 kg |
| MPA |
| Heat resistant | 120 °C |
| Cold resistant | -40 °C |
| UV resistant | |
| Suitable for soil | |
| Flush-mounting suited |
|
EPDM
Ethylene Propylene Diene Rubber (EPDM) is a synthetic rubber. The saturated backbone structure results in properties such as high UV and weather resistance, as well as high thermal resistance.
|
|
Stainless steel (AISI 304)
V2A (1.4301, AISI 304) is an austenitic, acid-resistant 18/10 Cr-Ni steel that is intergranularly resistant even after welding without subsequent heat treatment due to its low carbon content.
|
|
PVC (red)
Polyvinyl chloride (PVC) is a thermoplastic polymer that is produced from the monomer vinyl chloride by chain polymerization. PVC is resistant to acids, alkalis, alcohol, oil and petrol.
|
| Data Sheet |
| Crassus Modular Seal Calculator |
|
|
DATANORM 5
|
PDF
|
Excel
|
Word
|
Textdatei (.txt)
|
Formatierter Text (.rtf)
|
