Ostendorf - KG System (PVC)
Desafortunadamente, no puedes comprar este artículo con nosotros.
Crassus proporciona este sistema de tuberías estrictamente por razones informativas dentro del contexto del Léxico de Tuberías.

Dimensión
Extremo del tubo
Propiedades
Categoría de material Plástico
RXNR 2-3-S
Designación Ostendorf - KG System (PVC)
Fabricante Gebr. Ostendorf Kunststoffe GmbH
DN 125
Extremo del tubo Extremo puntiagudo
Nombre del material Hart-PVC (PVC-U)
Color (exterior) Naranja, Marrón
Aplicaciones Ingeniería civil, Haustechnik, Drenaje
Dimensionamiento
ID (mm) 118
DE (mm) 125
Espesor de pared (mm) 3.2
Descripción

The KG system (PVC, orange as color) is a sewer system that completely meets the requirements for water resistance, durability and simple operation. In this way, it directly ensures the protection of the environment from pollution by sewage. The unique coextrusion technology is the basis for the KG system (PVC-U). This makes it possible to manufacture a product whose wall is structurally similar to that of a bone known from the animal kingdom. When developing the Coex technology, the focus was on increasing the potential offered by polyvinyl chloride (PVC-U, hard) as a highly developed material that has proven itself over the years. The result is sewer pipes and fittings with a perfectly smooth inner wall that is resistant to abrasion and an elastic core that can withstand both ground pressure and traffic loads.

The KG-System (PVC-U) pipes and fittings are manufactured in accordance with the applicable European standards. Pipes are manufactured in accordance with Z-42.1-104 and DIN EN 13476, fittings in accordance with DIN EN 1401. These determine a greater wall thickness than the previously used DIN 19534. The system has ring stiffness class SN 4. KG pipes are hard, tough, thermoplastic. When exposed to the UV rays of daylight, it hardens and becomes sensitive to shock and breaks easily. The pipes are available in all common nominal sizes ([DN 70], DN 100 to DN 500 with lengths of 500 to 5000 mm). They are resistant to acids and alkalis, but not to organic solvents. PVC-U becomes bendable and plastic at 70 - 80 ° C and can be easily deformed in this state, which excludes its use in house installation.

KG pipes must not be used for house lines because they are not temperature-resistant. The pipes deform and outgas if the wastewater temperature is too high (from 65 ° C). In addition, a fire in the house produces toxic gases.

Source: http://www.bosy-online.de, Gebr. Ostendorf Kunststoffe GmbH

Conexiones de tubería flexible
CRA11021
Adaptador de enchufe CSA 125
120-141 mm | 117-127 mm
hasta 0.5 bar / 7.3 PSI
CRA12054
Acoplamiento adaptador CAC 1252
110-125 mm | 100-116 mm
hasta 0.6 bar / 8.7 PSI
CRA12056
Acoplamiento adaptador CAC 1361
121-136 mm | 80-95 mm
hasta 0.6 bar / 8.7 PSI
CRA12057
Acoplamiento adaptador CAC 1362
121-136 mm | 100-116 mm
hasta 0.6 bar / 8.7 PSI
CRA12033
Acoplamiento adaptador CAC 4000
121-136 mm | 110-121 mm
hasta 0.6 bar / 8.7 PSI
CRA12060
Acoplamiento adaptador CAC 1452
130-145 mm | 110-125 mm
hasta 0.6 bar / 8.7 PSI
CRA12063
Acoplamiento adaptador CAC 1603
144-160 mm | 121-136 mm
hasta 0.6 bar / 8.7 PSI
CRA12065
Acoplamiento adaptador CAC 1702
155-170 mm | 110-125 mm
hasta 0.6 bar / 8.7 PSI
CRA17416
Acoplamiento adaptador CAC 1923
170-192 mm | 121-136 mm
hasta 0.6 bar / 8.7 PSI
CRA17185
Acoplamiento adaptador CAC 2353
210-235 mm | 121-136 mm
hasta 0.6 bar / 8.7 PSI
CRA14029
Acoplamiento estándar CDC 125
110-125 mm
hasta 0.6 bar / 8.7 PSI
CRA14030
Acoplamiento estándar CDC 137
120-137 mm
hasta 0.6 bar / 8.7 PSI
CRA14039
Acoplamiento estándar (reforzado) CSC 137
120-137 mm
hasta 2.5 bar / 36.3 PSI
CRA14109
Acoplamiento estándar (reforzado) CSC 125
110-125 mm
hasta 2.5 bar / 36.3 PSI
CRA12033FKM
Acoplamiento adaptador CAC 4000 FKM
121-136 mm | 110-121 mm
hasta 0.6 bar / 8.7 PSI
CRA12054FKM
Acoplamiento adaptador CAC 1252 FKM
110-125 mm | 100-115 mm
hasta 0.6 bar / 8.7 PSI
CRA12057FKM
Acoplamiento adaptador CAC 1362 FKM
121-136 mm | 100-115 mm
hasta 0.6 bar / 8.7 PSI
CRA12063FKM
Acoplamiento adaptador CAC 1603 FKM
144-160 mm | 121-136 mm
hasta 0.6 bar / 8.7 PSI
CRA17416FKM
Acoplamiento adaptador CAC 1923 FKM
170-192 mm | 121-136 mm
hasta 0.6 bar / 8.7 PSI
CRA14039FKM
Acoplamiento estándar (reforzado) CSC 137 FKM
120-137 mm
hasta 2.5 bar / 36.3 PSI
CRA14109FKM
Acoplamiento estándar (reforzado) CSC 125 FKM
110-125 mm
hasta 2.5 bar / 36.3 PSI
CRA17422
Acoplamiento adaptador CAC 2002
185-210 mm | 110-125 mm
hasta 0.6 bar / 8.7 PSI
Productos especiales
CRA15078
Tapa exterior CEC 135
125-135 mm
hasta 0.6 bar / 8.7 PSI
CRA18625
Tapa interior CSV 114
108-120 mm | 1/2 mm
hasta 0.5 bar / 7.3 PSI
CRA18642
Tapa interior CSV 120 PVC
114-130 mm | 1/2 mm
hasta 0.5 bar / 7.3 PSI
CRA18643
Tapa interior CSV 125 PVC
118-142 mm | 1/2 mm
hasta 0.5 bar / 7.3 PSI

Importante: Todos los nombres de marcas y marcas comerciales mencionados en este sitio web son propiedad de sus respectivos propietarios. La mención de estos nombres y términos es solo para fines informativos y no implica ninguna cooperación o asociación con los respectivos fabricantes (uso nominativo). La información y las descripciones proporcionadas sirven como una visión general general y no constituyen un asesoramiento o recomendación de productos vinculante. A pesar de una investigación cuidadosa, no se garantiza la integridad, exactitud o actualidad del contenido. Todas las imágenes mostradas (imágenes de productos, gráficos, etc.) fueron creadas por Crassus GmbH & Co. KG o reproducidas con fines de demostración. Pueden diferir del producto original. No se acepta ninguna responsabilidad por daños materiales o inmateriales causados por el uso o no uso de la información proporcionada o por el uso de información incorrecta o incompleta. Si los textos o información del fabricante se resumen o citan con nuestras propias palabras, esto se hace de una manera que respeta los derechos de autor de los respectivos titulares de derechos. El uso posterior del contenido publicado aquí requiere nuestro consentimiento expreso y, si es necesario, la aprobación del respectivo titular de los derechos.