Alphacan Omniplast - Primus HL SN12 (Wastewater)
Malheureusement, vous ne pouvez pas acheter cet article chez nous.
Crassus fournit ce système de tuyauterie strictement à des fins informatives dans le cadre du Lexique des Tuyaux.

Dimension
Extrémité du tuyau
Propriétés
Catégorie de matériau Plastique / Matière plastique
RXNR 27-5-S
Désignation Alphacan Omniplast - Primus HL SN12 (Wastewater)
Fabricant Omniplast Deutschland GmbH
DN 200
Extrémité du tuyau Extrémité pointue
Nom du matériau Hart-PVC (PVC-U)
Couleur (extérieure) Orange
Domaines d'application Haustechnik, Génie civil
Cotation
ID (mm) 188
Dext (mm) 200
Description

The philosophy of Alphacan Omniplast is to manufacture ready-to-install pipe systems that are smooth inside and out, which can be easily and easily assembled, filled and compacted into a pipeline. Thanks to its high ring stiffness (≥ 12 kN / m²) and longitudinal stiffness and the molded socket, the Primus HL SN 12 pipe system offers extraordinary stability and security with very good assembly capability and simple installation properties. Due to the clear color separation, sewage pipes in clay-brown and rainwater pipes in blue, it is easy to distinguish between sewage and rainwater even after decades of inspection.

PRIMUS HL SN 12 is the full wall high load sewer pipe system according to the standard of the oldest plastic pipe producer in Germany. Due to the complete fulfillment of all requirements of DIN EN 1401-1, Primus HL SN 12 has unlimited building authority approval. As a technically mature standard material in civil engineering, PVC-U has an extraordinarily high chemical resistance and is not attacked by any of the substances that may occur in wastewater.

The material:

Through the consistent use of the highest quality PVC new material and the production-technical know-how of the oldest plastic pipe producer in Germany, the ring stiffness of ≥ 12 kN / m² according to ISO 9969 for all components of the solid wall sewer pipe system Primus HL SN 12 was achieved through an independent technical solution. The material parameters were decidedly improved, but the required amount of material was not increased. Compared to a standard PVC material, for example, the E-module of the Primus HL SN 12 has been increased from around 3000 N / mm² to well over 4000 N / mm²! This significant material improvement in connection with the low creep factor also achieved the corresponding long-term ring stiffness according to DIN 16961. Should any repair work arise, you can fall back on the inexpensive and flexible Crassus range, which is known for its interior and exterior solutions.

Chemical resistance:

As a technically mature standard material in civil engineering, PVC-U has an extraordinarily high chemical resistance and is not attacked by any of the substances that may occur in wastewater. Any biogenic sulfuric acid, mineral oils, fats and fuels that may develop, but also other chemicals such as acids or alkalis, do not damage PVC-U, unlike other known pipe materials.

Connection option to other sewage systems:

Crassus hose adapters, Crassus combi adapters, Crassus adapter couplings, Crassus rubber adapters as well as bends, branches, Crassus end caps and much more.

Pipe repair:

Crassus Pipe Doctor and Crassus Pipe Plaster

Source: Omniplast, Crassus

Connexions de tuyaux flexibles
CRA17420
Adaptateur CAC 2000
180-200 mm | 130-145 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17421
Adaptateur CAC 2001
180-200 mm | 155-170 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17034
Adaptateur CAC 6000
180-200 mm | 160-180 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17418
Adaptateur CAC 1991
185-210 mm | 100-115 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17422
Adaptateur CAC 2002
185-210 mm | 160-180 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17182
Adaptateur CAC 2154
190-215 mm | 150-165 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17426
Adaptateur CAC 2152
195-215 mm | 100-115 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17183
Adaptateur CAC 2254
200-225 mm | 160-175 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17188
Adaptateur CAC 2356
210-235 mm | 190-215 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17191
Adaptateur CAC 2656
240-265 mm | 190-215 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17195
Adaptateur CAC 2756
250-275 mm | 200-225 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA12035
Adaptateur CAC 9001
260-285 mm | 180-205 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17199
Adaptateur CAC 2956
270-295 mm | 185-210 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17209
Adaptateur CAC 3351
310-335 mm | 180-205 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA16204
Raccord CDC 215
200-215 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA16217
Raccord renforcé CSC 200
175-200 mm
jusqu'à 2.5 bar / 36.3 PSI
CRA16218
Raccord renforcé CSC 215
190-215 mm
jusqu'à 2.5 bar / 36.3 PSI
CRA16219
Raccord renforcé CSC 225
200-225 mm
jusqu'à 2.5 bar / 36.3 PSI
CRA17420FKM
Adaptateur CAC 2000 FKM
180-200 mm | 130-145 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA16204FKM
Raccord CDC 215 FKM
190-215 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA16217FKM
Raccord renforcé CSC 200 FKM
175-200 mm
jusqu'à 2.5 bar / 36.3 PSI
CRA16218FKM
Raccord renforcé CSC 215 FKM
190-215 mm
jusqu'à 2.5 bar / 36.3 PSI
CRA16900
Raccord renforcé CSC XL 225
200-225 mm
jusqu'à 2.5 bar / 36.3 PSI
CRA17422
Adaptateur CAC 2002
185-210 mm | 110-125 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17422
Adaptateur CAC 2002
185-210 mm | 144-160 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA17191
Adaptateur CAC 2656
195-220 mm | 155-170 mm
jusqu'à 0.6 bar / 8.7 PSI
Produits spéciaux
CRA18762
Bouchon extérieur CEC 215
200-215 mm
jusqu'à 0.6 bar / 8.7 PSI
CRA18629
Obturateur à vis CSV 200
180-205 mm | 1 mm
jusqu'à 0.5 bar / 7.3 PSI

Important: Tous les noms de marques et marques mentionnés sur ce site sont la propriété de leurs détenteurs respectifs. La mention de ces noms et désignations est à titre informatif uniquement et n'implique aucune coopération ou partenariat avec les fabricants respectifs (utilisation nominative). Les informations et descriptions fournies servent à donner un aperçu général et ne constituent pas un conseil ou une recommandation de produit contraignante. Malgré des recherches minutieuses, aucune garantie n'est donnée quant à l'exhaustivité, l'actualité ou l'exactitude des contenus. Toutes les images présentées (images de produits, graphiques, etc.) ont été créées par Crassus GmbH & Co. KG ou reproduites à des fins de démonstration. Elles peuvent différer du produit original. Aucune responsabilité n'est assumée pour les dommages matériels ou immatériels résultant de l'utilisation ou de la non-utilisation des informations fournies ou de l'utilisation d'informations incorrectes ou incomplètes. Si des textes ou informations des fabricants sont résumés ou cités dans nos propres termes, cela se fait dans le respect des droits d'auteur des titulaires de droits respectifs. La réutilisation des contenus publiés ici nécessite notre consentement exprès ainsi que, le cas échéant, l'autorisation du détenteur des droits respectif.