Ostendorf - KG System (PVC)
Desafortunadamente, no puedes comprar este artículo con nosotros.
Crassus proporciona este sistema de tuberías estrictamente por razones informativas dentro del contexto del Léxico de Tuberías.

Dimensión
Extremo del tubo
Propiedades
Categoría de material Plástico
RXNR 2-1-S
Designación Ostendorf - KG System (PVC)
Fabricante Gebr. Ostendorf Kunststoffe GmbH
DN 110
Extremo del tubo Extremo puntiagudo
Nombre del material Hart-PVC (PVC-U)
Color (exterior) Naranja, Marrón
Aplicaciones Ingeniería civil, Haustechnik, Drenaje
Dimensionamiento
ID (mm) 103
DE (mm) 110
Espesor de pared (mm) 3.2
Descripción

The KG system (PVC, orange as color) is a sewer system that completely meets the requirements for water resistance, durability and simple operation. In this way, it directly ensures the protection of the environment from pollution by sewage. The unique coextrusion technology is the basis for the KG system (PVC-U). This makes it possible to manufacture a product whose wall is structurally similar to that of a bone known from the animal kingdom. When developing the Coex technology, the focus was on increasing the potential offered by polyvinyl chloride (PVC-U, hard) as a highly developed material that has proven itself over the years. The result is sewer pipes and fittings with a perfectly smooth inner wall that is resistant to abrasion and an elastic core that can withstand both ground pressure and traffic loads.

The KG-System (PVC-U) pipes and fittings are manufactured in accordance with the applicable European standards. Pipes are manufactured in accordance with Z-42.1-104 and DIN EN 13476, fittings in accordance with DIN EN 1401. These determine a greater wall thickness than the previously used DIN 19534. The system has ring stiffness class SN 4. KG pipes are hard, tough, thermoplastic. When exposed to the UV rays of daylight, it hardens and becomes sensitive to shock and breaks easily. The pipes are available in all common nominal sizes ([DN 70], DN 100 to DN 500 with lengths of 500 to 5000 mm). They are resistant to acids and alkalis, but not to organic solvents. PVC-U becomes bendable and plastic at 70 - 80 ° C and can be easily deformed in this state, which excludes its use in house installation.

KG pipes must not be used for house lines because they are not temperature-resistant. The pipes deform and outgas if the wastewater temperature is too high (from 65 ° C). In addition, a fire in the house produces toxic gases.

Source: http://www.bosy-online.de, Gebr. Ostendorf Kunststoffe GmbH

Conexiones de tubería flexible
CRA10087
Reductor de tubería CGA 123 | 110
123 mm | 110 mm
hasta 0.5 bar / 7.3 PSI
CRA10006
Reductor de tubería CGA 150 | 110
150 mm | 110 mm
hasta 0.5 bar / 7.3 PSI
CRA10017
Reductor de tubería múltiple CKA 100-105 | 75/50
100-105 mm | 75 / 50 mm
hasta 0.5 bar / 7.3 PSI
CRA10014
Reductor de tubería múltiple CKA 100-105 | 90/75
100-105 mm | 90 / 75 mm
hasta 0.5 bar / 7.3 PSI
CRA10015
Reductor de tubería múltiple CKA 123-130 | 110/75
123-130 mm | 110 / 75 mm
hasta 0.5 bar / 7.3 PSI
CRA10107
Reductor de tubería múltiple CKA 150/125 | 110
150 / 125 mm | 110 mm
hasta 0.5 bar / 7.3 PSI
CRA11020
Adaptador de enchufe CSA 100
100-116 mm | 100-105 mm
hasta 0.5 bar / 7.3 PSI
CRA12052
Acoplamiento adaptador CAC 1155
100-116 mm | 75-90 mm
hasta 0.6 bar / 8.7 PSI
CRA12039
Acoplamiento adaptador CAC 1201
105-120 mm | 35-42 mm
hasta 0.6 bar / 8.7 PSI
CRA12041
Acoplamiento adaptador CAC 1225
110-122 mm | 48-56 mm
hasta 0.6 bar / 8.7 PSI
CRA12042
Acoplamiento adaptador CAC 1226
110-122 mm | 60-68 mm
hasta 0.6 bar / 8.7 PSI
CRA12040
Acoplamiento adaptador CAC 1221
110-122 mm | 80-95 mm
hasta 0.6 bar / 8.7 PSI
CRA12054
Acoplamiento adaptador CAC 1252
110-125 mm | 100-116 mm
hasta 0.6 bar / 8.7 PSI
CRA12057
Acoplamiento adaptador CAC 1362
121-136 mm | 100-116 mm
hasta 0.6 bar / 8.7 PSI
CRA12033
Acoplamiento adaptador CAC 4000
121-136 mm | 110-121 mm
hasta 0.6 bar / 8.7 PSI
CRA12060
Acoplamiento adaptador CAC 1452
130-145 mm | 110-125 mm
hasta 0.6 bar / 8.7 PSI
CRA12062
Acoplamiento adaptador CAC 1602
144-160 mm | 110-122 mm
hasta 0.6 bar / 8.7 PSI
CRA12065
Acoplamiento adaptador CAC 1702
155-170 mm | 110-125 mm
hasta 0.6 bar / 8.7 PSI
CRA17415
Acoplamiento adaptador CAC 1922
170-192 mm | 110-122 mm
hasta 0.6 bar / 8.7 PSI
CRA17418
Acoplamiento adaptador CAC 1991
185-210 mm | 100-115 mm
hasta 0.6 bar / 8.7 PSI
CRA17426
Acoplamiento adaptador CAC 2152
195-215 mm | 100-115 mm
hasta 0.6 bar / 8.7 PSI
CRA17184
Acoplamiento adaptador CAC 2352
210-235 mm | 110-122 mm
hasta 0.6 bar / 8.7 PSI
CRA11018
Acoplamiento estándar CDC 100
100-116 mm
hasta 0.6 bar / 8.7 PSI
CRA14029
Acoplamiento estándar CDC 125
110-125 mm
hasta 0.6 bar / 8.7 PSI
CRA14037
Acoplamiento estándar (reforzado) CSC 116
100-116 mm
hasta 2.5 bar / 36.3 PSI
CRA14038
Acoplamiento estándar (reforzado) CSC 121
110-121 mm
hasta 2.5 bar / 36.3 PSI
CRA14109
Acoplamiento estándar (reforzado) CSC 125
110-125 mm
hasta 2.5 bar / 36.3 PSI
CRA12033FKM
Acoplamiento adaptador CAC 4000 FKM
121-136 mm | 110-121 mm
hasta 0.6 bar / 8.7 PSI
CRA12041FKM
Acoplamiento adaptador CAC 1225 FKM
110-122 mm | 48-56 mm
hasta 0.6 bar / 8.7 PSI
CRA12040FKM
Acoplamiento adaptador CAC 1221 FKM
110-122 mm | 80-95 mm
hasta 0.6 bar / 8.7 PSI
CRA12054FKM
Acoplamiento adaptador CAC 1252 FKM
110-125 mm | 100-115 mm
hasta 0.6 bar / 8.7 PSI
CRA12057FKM
Acoplamiento adaptador CAC 1362 FKM
121-136 mm | 100-115 mm
hasta 0.6 bar / 8.7 PSI
CRA12062FKM
Acoplamiento adaptador CAC 1602 FKM
144-160 mm | 110-122 mm
hasta 0.6 bar / 8.7 PSI
CRA17415FKM
Acoplamiento adaptador CAC 1922 FKM
170-192 mm | 110-122 mm
hasta 0.6 bar / 8.7 PSI
CRA14028FKM
Acoplamiento estándar CDC 115 FKM
100-115 mm
hasta 0.6 bar / 8.7 PSI
CRA14037FKM
Acoplamiento estándar (reforzado) CSC 115 FKM
100-115 mm
hasta 2.5 bar / 36.3 PSI
CRA12037
Acoplamiento adaptador CAC 1153
100-115 mm | 50-64 mm
hasta 0.6 bar / 8.7 PSI
CRA12034
Acoplamiento adaptador CAC 1152
100-115 mm | 40-50 mm
hasta 0.6 bar / 8.7 PSI
CRA14109FKM
Acoplamiento estándar (reforzado) CSC 125 FKM
110-125 mm
hasta 2.5 bar / 36.3 PSI
CRA17422
Acoplamiento adaptador CAC 2002
185-210 mm | 110-125 mm
hasta 0.6 bar / 8.7 PSI
Productos especiales
CRA15073
Rama flexible CFA 118 (106-118, 4'')
106-118 mm
hasta 0.6 bar / 8.7 PSI
CRA15069
Curva flexible CFB 118 (90°, 106-118, 4'')
106-118 mm
hasta 0.6 bar / 8.7 PSI
CRA15077
Tapa exterior CEC 115
105-115 mm
hasta 0.6 bar / 8.7 PSI
CRA18624
Tapa interior CSV 100
94-110 mm | 1/2 mm
hasta 0.5 bar / 7.3 PSI
CRA18641
Tapa interior CSV 100 PVC
95-110 mm | 1/2 mm
hasta 0.5 bar / 7.3 PSI

Importante: Todos los nombres de marcas y marcas comerciales mencionados en este sitio web son propiedad de sus respectivos propietarios. La mención de estos nombres y términos es solo para fines informativos y no implica ninguna cooperación o asociación con los respectivos fabricantes (uso nominativo). La información y las descripciones proporcionadas sirven como una visión general general y no constituyen un asesoramiento o recomendación de productos vinculante. A pesar de una investigación cuidadosa, no se garantiza la integridad, exactitud o actualidad del contenido. Todas las imágenes mostradas (imágenes de productos, gráficos, etc.) fueron creadas por Crassus GmbH & Co. KG o reproducidas con fines de demostración. Pueden diferir del producto original. No se acepta ninguna responsabilidad por daños materiales o inmateriales causados por el uso o no uso de la información proporcionada o por el uso de información incorrecta o incompleta. Si los textos o información del fabricante se resumen o citan con nuestras propias palabras, esto se hace de una manera que respeta los derechos de autor de los respectivos titulares de derechos. El uso posterior del contenido publicado aquí requiere nuestro consentimiento expreso y, si es necesario, la aprobación del respectivo titular de los derechos.