Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	1-6-M
Designation	Ostendorf - HT System (PP)
Manufacturer	Ostendorf
DN	50
Pipe end	Socket
Material name	Polypropylene
Color (exterior)	Gray
Applications	Drainage, HVAC/MEP Sector

ID (mm)	50
OD (mm)	63
Wall thickness (mm)	1.8

The HT pipe (the designation "HT" stands for high temperature resistance, which means up to 95 ° C) is made of PP (polypropylene). This gray pipe is used in the building up to the floor slab or outer wall. The HT pipes are used for the sewer pipes in the buildings. The HT is durable, corrosion-resistant and resistant to aggressive waste water and is flame-retardant B1. Due to the smooth surface there are no incrustations. It is available in the dimensions DN 32 to DN 160 and in lengths from 150mm to 5000mm. The fast, secure plug connection makes the system very easy to lay and assemble and meets the requirements of the most demanding customer. The designation "HT" stands for high temperature resistance (up to 95 ° C).

Plastic pipes are mainly used in sewage systems (waste water systems). A distinction is made here between KG pipe and HT pipe, AS pipe and PE pipe. In addition to the fittings or fittings (bends and branches are available in various angles, from 15 ° to 87 °, sliding sleeves, cleaning T-pieces, plugs), the pipes are part of the systems.

Source: Ostendorf

Flexible pipe connections

CRA10089

Pipe Reducer CGA 50 | 32

50 mm | 32 mm

up to 0.5 bar / 7.3 PSI

CRA10090

Pipe Reducer CGA 50 | 40

50 mm | 40 mm

up to 0.5 bar / 7.3 PSI

CRA10011

Multi Pipe Reducer CKA 50 | 40/32

50 mm | 40 / 32 mm

up to 0.5 bar / 7.3 PSI

Special products

CRA18647

Inside End Cap CSV 50 PVC

37-54 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

CRA18637

Inside End Cap CSV 60 PVC

48-65 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.