Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	264-8-S
Designation	Gerodur - RCprotect®
Manufacturer	Gerodur MPM Kunststoffverarbeitung GmbH & Co. KG
DN	225
Pipe end	Spigot
Material name	Polyethylen PE100-RC
Color (exterior)	Yellow, Brown, Blue
Applications	Civil Engineering

ID (mm)	198.2
OD (mm)	225
Wall thickness (mm)	13,4

RCprotect®

The RCprotect® pressure pipe is a solid-wall pipe with a colored outer layer made of PE100-RC, offering high resistance to slow crack growth and permanent point loads. The colored outer layer allows for quick identification of the transported medium. These pipes are suitable for bedding-free installation and are widely used in gas and water supply, pressurized wastewater systems, anergy networks, and district cooling systems. They comply with DIN EN 13244 and PAS 1075 standards, are tested according to DIN EN ISO/IEC 17025, and connections are manufactured in accordance with DVS guidelines.

Technical Advantages and Features:

•    High resistance to stress cracking and point loads (according to PAS 1075)
•    Excellent durability against slow crack growth
•    Color-coded outer layer for medium identification
•    Suitable for bedding-free installation and alternative laying techniques
•    Certified according to DIN EN 13244, PAS 1075, DIN EN ISO/IEC 17025
•    Dimensions: DN/OD 25 mm – 630 mm, SDR 11 / 17 (up to DN/OD 63 mm only SDR 11 according to DVGW)
•    Various connection options (butt fusion, electrofusion, press, push-fit, clamp, and flange connections)

Source: www.gerodur.de

Flexible pipe connections

CRA17183

Adaptor Coupling CAC 2254

200-225 mm | 160-175 mm

up to 0.6 bar / 8.7 PSI

CRA17184

Adaptor Coupling CAC 2352

210-235 mm | 110-122 mm

up to 0.6 bar / 8.7 PSI

CRA17185

Adaptor Coupling CAC 2353

210-235 mm | 121-136 mm

up to 0.6 bar / 8.7 PSI

CRA17186

Adaptor Coupling CAC 2354

210-235 mm | 144-160 mm

up to 0.6 bar / 8.7 PSI

CRA17187

Adaptor Coupling CAC 2355

210-235 mm | 170-192 mm

up to 0.6 bar / 8.7 PSI

CRA17188

Adaptor Coupling CAC 2356

210-235 mm | 190-215 mm

up to 0.6 bar / 8.7 PSI

CRA17193

Adaptor Coupling CAC 2657

240-265 mm | 210-235 mm

up to 0.6 bar / 8.7 PSI

CRA17195

Adaptor Coupling CAC 2756

250-275 mm | 200-225 mm

up to 0.6 bar / 8.7 PSI

CRA17197

Adaptor Coupling CAC 2907

265-290 mm | 210-235 mm

up to 0.6 bar / 8.7 PSI

CRA17206

Adaptor Coupling CAC 3207

295-320 mm | 210-235 mm

up to 0.6 bar / 8.7 PSI

CRA16205

Drain Coupling CDC 225

210-225 mm

up to 0.6 bar / 8.7 PSI

CRA16219

Standard Coupling CSC 225

200-225 mm

up to 2.5 bar / 36.3 PSI

CRA16220

Standard Coupling CSC 250

225-250 mm

up to 2.5 bar / 36.3 PSI

CRA16220FKM

Standard Coupling CSC 250 FKM

225-250 mm

up to 2.5 bar / 36.3 PSI

CRA16900

Standard Coupling CSC XL 225

200-225 mm

up to 2.5 bar / 36.3 PSI

Special products

CRA18629

Inside End Cap CSV 200

180-205 mm | 1 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.