Material category | Plastic |
RXNR | 10-11-S |
Designation | Geberit - Silent-PP |
Manufacturer | Geberit |
DN | 100 |
Pipe end | Spigot |
Material name | Polypropylene, PP-MD, PP-Copolymer |
Color (exterior) | Black |
Applications | HVAC/MEP Sector, Drainage |
ID (mm) | 102.8 |
OD (mm) | 110 |
Wall thickness (mm) | 3.6 |
The new Geberit waste water plug-in system Silent-PP is ideal for quick, economical and sound-optimized installation of house drainage. The Geberit Silent-PP drainage system can be used consistently in single and two-family houses as well as in multi-storey residential buildings, taking into account the building situation and the required noise levels. The Geberit Silent-PP consists of robust, mineral-reinforced three-layer pipes. Due to their small size, they make it possible to install the entire sewage system without long sleeves. The high ring rigidity of the system pipes and the proven EPDM lip seals in the sleeves keep the sewage system reliably and permanently tight. Pipes and fittings can also be processed at low temperatures thanks to the cold-impact resistant materials. The high UV resistance also enables economical storage outdoors for a short time. All fittings have a 30 degree mark for quick and easy alignment. The correct insertion depth is indicated by a visual check via a simple stop The system can be used both inside buildings and buried underground within the building structure (application code "BD" - Building / Drainage) based on DIN EN 1451-1. Silent-PP pipes and fittings are approved by the DIBt under the approval number Z-42.1-432. The system must not be subjected to pressure and therefore must not be used for roof drainage with pressure flow (Pluvia). Geberit Silent-PP may be used for internal rainwater pipes up to a maximum pressure load of 500 hPa (0.5 bar / 5 m geodetic height). Areas of application - Domestic sewage - connecting cables - Downpipes - rainwater pipes - ventilation ducts - manifolds - Cast-in pipes Source: Geberit Vertriebs GmbH |