Funke - HS-Drainage pipe (slotted)
Produktbild
Unfortunately, you cannot purchase this item from us.
Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension
Pipe end
Properties
Material category Plastic
RXNR 190-5-S
Designation Funke - HS-Drainage pipe (slotted)
Manufacturer Funke
DN 250
Pipe end Spigot
Material name Polyvenylclorid (PVC-U)
Color (exterior) Blue
Applications Drainage
Dimensioning
ID (mm) 233.6
OD (mm) 250
Wall thickness (mm) 8,2
Description
HS®-Sickerrohre sind entwickelt worden für den Einsatz in Versickerungsanlagen als Rohr- oder Rohrkies-Rigole, die Entwässerung des Straßen- und Gleisoberbaus sowie von befestigten Flächen wie Flugplätzen, Sportanlagen, Straßen, Parkdecks und als Drainageleitungen bei erhöhten Anforderungen. Zur Produktgruppe der Sickerrohre zählen Vollsicker-, Teilsicker- und Mehrzweckrohre. HS®-Sickerrohre werden in den Nennweiten DN/OD 110 bis DN/OD 630 hergestellt. Das Schlitzbild entspricht der DIN 4262-1 (Rohre und Formteile für die unterirdische Entwässerung im Verkehrswege- und Tiefbau, 10.2009). Aufgrund der hohen Ringsteifigkeit von mindestens 10,5 kN/m2 (geschlitzt) sind HS®-Sickerrohre sowohl bei großen Erdüberdeckungen als auch geringen Erdüberdeckungen und gleichzeitiger Verkehrslast bestens geeignet. Die rechnerischen Langzeitverformungen liegen bei „üblichen“ Randbedingungen in der Regel unter 3%, die Sicherheitsreserven gegen Spannungs- und Stabilitätsversagen liegen deutlich über den geforderten Werten. AufHS®-Sickerrohre grund der glatten Oberfläche verfügen HS®-Sickerrohre über ausgezeichnete Hydraulikeigenschaften. Im Gegensatz zu gewellten Rohren – zum Beispiel handelsübliche Dränrohre/k=2,0 mm – beträgt die absolute Rauheit bei glattwandigen Rohren aus PVC-U maximal 0,01 mm. Insbesondere bei Gefahr von Ablagerungsbildung stellen glattwandige Rohre eine hervorragende Lösung dar. Weitere Vorteile: die hervorragende chemische Beständigkeit sowie die Abrieb- und die Hochdruckspülfestigkeit.

• Vollsicker-, Teilsicker- und Mehrzweckrohre
• Nennweiten von DN/OD 110 bis DN/OD 630
• Schlitzbild nach DIN 4262-1
• hervorragende Hydraulik
• chemisch beständig pH 2–12
• hochdruckspülfest
• Ringsteifigkeit S ≥ 10,5 kN/m2

Quelle: Funke Kunstoffe GmbH
Flexible pipe connections
CRA17189
Adaptor Coupling CAC 2654
240-265 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17190
Adaptor Coupling CAC 2655
240-265 mm | 170-192 mm
up to 0.6 bar / 8.7 PSI
CRA17191
Adaptor Coupling CAC 2656
240-265 mm | 190-215 mm
up to 0.6 bar / 8.7 PSI
CRA17193
Adaptor Coupling CAC 2657
240-265 mm | 210-235 mm
up to 0.6 bar / 8.7 PSI
CRA17194
Adaptor Coupling CAC 2754
250-275 mm | 160-175 mm
up to 0.6 bar / 8.7 PSI
CRA17195
Adaptor Coupling CAC 2756
250-275 mm | 200-225 mm
up to 0.6 bar / 8.7 PSI
CRA17037
Adaptor Coupling CAC 2250
260-285 mm | 240-250 mm
up to 0.6 bar / 8.7 PSI
CRA17198
Adaptor Coupling CAC 2908
265-290 mm | 235-260 mm
up to 0.6 bar / 8.7 PSI
CRA17207
Adaptor Coupling CAC 3208
295-320 mm | 240-265 mm
up to 0.6 bar / 8.7 PSI
CRA17210
Adaptor Coupling CAC 3608
335-360 mm | 240-265 mm
up to 0.6 bar / 8.7 PSI
CRA17213
Adaptor Coupling CAC 3858
360-385 mm | 240-265 mm
up to 0.6 bar / 8.7 PSI
CRA17228
Adaptor Coupling CAC 4208
395-420 mm | 240-265 mm
up to 0.6 bar / 8.7 PSI
CRA16644
Drain Coupling CDC 250
235-250 mm
up to 0.6 bar / 8.7 PSI
CRA16145
Drain Coupling CDC 265
250-265 mm
up to 0.6 bar / 8.7 PSI
CRA16110
Standard Coupling CSC 265
240-265 mm
up to 2.5 bar / 36.3 PSI
CRA16220
Standard Coupling CSC 250
225-250 mm
up to 2.5 bar / 36.3 PSI
CRA16221
Standard Coupling CSC 275
250-275 mm
up to 2.5 bar / 36.3 PSI
CRA16110FKM
Standard Coupling CSC 265 FKM
240-265 mm
up to 2.5 bar / 36.3 PSI
CRA16220FKM
Standard Coupling CSC 250 FKM
225-250 mm
up to 2.5 bar / 36.3 PSI
CRA16221FKM
Standard Coupling CSC 275 FKM
250-275 mm
up to 2.5 bar / 36.3 PSI
Special products
CRA15767
Outside End Cap CEC 250
235-250 mm
up to 0.6 bar / 8.7 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.