Various manufacturers - Clay pipe (from the GDR) according to TGL 11515
Unfortunately, you cannot purchase this item from us.
Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension
Pipe end
Properties
Material category Ceramic / Vitrified Clay Pipe
RXNR 66-2-S
Designation Various manufacturers - Clay pipe (from the GDR) according to TGL 11515
Manufacturer wird nicht mehr hergestellt, Diverse Hersteller, Lausitzer Dachziegelwerke, Thüringer Dachziegelwerke, VEB Baustoffwerke Doblug, Vereinigte Dränrohrwerke, Ziegelkombinat (Malliß, Potsdam, Zehdenick, Buchholz, Neukirchen), Ziegelwerk Halle
DN 50
Pipe end Spigot
Material name Vitrified Clay
Color (exterior) Brown
Applications Civil Engineering, HVAC/MEP Sector, Drainage
Dimensioning
ID (mm) 50
OD (mm) 60
Flexible pipe connections
CRA10089
Pipe Reducer CGA 50 | 32
50 mm | 32 mm
up to 0.5 bar / 7.3 PSI
CRA10090
Pipe Reducer CGA 50 | 40
50 mm | 40 mm
up to 0.5 bar / 7.3 PSI
CRA10011
Multi Pipe Reducer CKA 50 | 40/32
50 mm | 40 / 32 mm
up to 0.5 bar / 7.3 PSI
CRA12047
Adaptor Coupling CAC 0633
53-64 mm | 40-50 mm
up to 0.6 bar / 8.7 PSI
CRA12030
Adaptor Coupling CAC 0682
60-68 mm | 38-43 mm
up to 0.6 bar / 8.7 PSI
CRA12049
Adaptor Coupling CAC 0894
75-90 mm | 53-64 mm
up to 0.6 bar / 8.7 PSI
CRA12032
Adaptor Coupling CAC 0924
82-92 mm | 60-68 mm
up to 0.6 bar / 8.7 PSI
CRA12042
Adaptor Coupling CAC 1226
110-122 mm | 60-68 mm
up to 0.6 bar / 8.7 PSI
CRA14024
Drain Coupling CDC 065
50-65 mm
up to 0.6 bar / 8.7 PSI
CRA14046
Drain Coupling CDC 068
60-68 mm
up to 0.6 bar / 8.7 PSI
CRA14033
Standard Coupling CSC 065
50-65 mm
up to 2.5 bar / 36.3 PSI
CRA14024FKM
Standard Coupling CDC 065 FKM
50-65 mm
up to 0.6 bar / 8.7 PSI
CRA12037
Adaptor Coupling CAC 1153
100-115 mm | 50-64 mm
up to 0.6 bar / 8.7 PSI
CRA12025
Adaptor Coupling CAC 0751
70-75 mm | 58-64 mm
up to 0.6 bar / 8.7 PSI
CRA12024
Adaptor Coupling CAC 0651
50-65 mm | 35-42 mm
up to 0.6 bar / 8.7 PSI
CRA14033FKM
Standard Coupling CSC 065 FKM
50-65 mm
up to 2.5 bar / 36.3 PSI
Special products
CRA15071
Flexible Branch CFA 060 (50-60, 2'')
50-60 mm
up to 0.6 bar / 8.7 PSI
CRA15067
Flexible Bend CFB 060 (90°, 50-60, 2'')
50-60 mm
up to 0.6 bar / 8.7 PSI
CRA15760
Outside End Cap CEC 063
54-63 mm
up to 0.6 bar / 8.7 PSI
CRA15075
Outside End Cap CEC 068
58-68 mm
up to 0.6 bar / 8.7 PSI
CRA18647
Inside End Cap CSV 50 PVC
37-54 mm | 1/2 mm
up to 0.5 bar / 7.3 PSI
CRA18637
Inside End Cap CSV 60 PVC
48-65 mm | 1/2 mm
up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.