Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	245-3-M
Designation	Ostendorf - PP Cable Protection Pipe SN4
Manufacturer	Ostendorf
DN	90
Pipe end	Socket
Material name	Polypropylen PP-MD
Color (exterior)	Black
Applications	Kabelschutz

ID (mm)	100.1
OD (mm)	104.5
Wall thickness (mm)	2,2

PP Cable Protection Pipe SN4

The PP Cable Protection Pipe SN4 is a black solid-wall pipe with an integrated socket and a high-performance triple-lip seal made of SBR, factory-installed in accordance with DIN EN 681. Manufactured according to DIN 16878, it is suitable for use in high and extra-high voltage cable installations. The polypropylene (PP-MD) material combines flexibility with high rigidity and, thanks to its smooth surface, provides optimal conditions for easy cable insertion.
The pipe offers high chemical resistance within a pH range of 1 to 13 and a continuous temperature resistance of up to 80°C. It has a pressure resistance of at least 0.5 bar in accordance with DIN EN ISO 13259 and has been successfully tested at 13 bar with the triple-lip seal.
The mineral-reinforced material composition ensures outstanding technical properties while reducing raw material consumption. The pipe is highly robust and suitable for installation even at low temperatures.

Technical Properties:
•    Standard: DIN 16878
•    Material: Polypropylene (PP-MD)
•    Color: Black
•    Seal: Triple-lip seal made of SBR, according to DIN EN 681
•    Cold bending radius: According to DIN CEN TS 15223
•    Coefficient of thermal expansion: ≈ 0.08 mm/m x K
•    Chemical resistance: pH 1–13
•    Continuous temperature resistance: 80°C
•    Surface resistance: > 10¹¹ Ω
•    Short-term modulus of elasticity: 2500 N/mm²
•    Long-term modulus of elasticity: 450 N/mm²
•    Pressure resistance: Min. 0.5 bar according to DIN EN ISO 13259

Advantages:
•    Smooth inner and outer surface for optimal cable management
•    High mechanical stability and flexibility
•    Resistant to chemicals, UV radiation, and environmental influences
•    Suitable for applications from telecommunication cables to extra-high voltage lines
•    Sustainable material composition with reduced raw material consumption
•    Can be installed even at low temperatures

Source: www.ostendorf-kunststoffe.com

Flexible pipe connections

CRA10017

Multi Pipe Reducer CKA 100-105 | 75/50

100-105 mm | 75 / 50 mm

up to 0.5 bar / 7.3 PSI

CRA10014

Multi Pipe Reducer CKA 100-105 | 90/75

100-105 mm | 90 / 75 mm

up to 0.5 bar / 7.3 PSI

Special products

CRA18624

Inside End Cap CSV 100

94-110 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

CRA18641

Inside End Cap CSV 100 PVC

95-110 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.