Geberit - PE-HD
Produktbild
很抱歉,您无法在我们这里购买此商品。
Crassus仅出于信息目的在管道词典的背景下提供这套管道系统。

尺寸
管道末端
特性
材料类别 塑料
RXNR 9-3-S
指定 Geberit - PE-HD
制造商 Geberit AG
DN 50
管道末端 尖端
材料名称 高密度聚乙烯
颜色 (外部) 黑色
应用领域 工业, 土木工程, Haustechnik, 排水, 桥梁
标尺
内径(毫米) 44
外径(毫米) 50
壁厚 (毫米) 3
描述

Geberit PE drainage system is suitable for a large number of areas of application in roof drainage, in industry, in trade or laboratories, for burial, in concrete or in bridge structures. They are made of the robust pipe material polyethylene with high density (PE-HD). Hot water up to 80 ° C, briefly and without mechanical stress even up to 100 ° C, does not attack the material. It is resistant to around 95% of all commercially available alkalis, acids and chemicals. The pipes and fittings also withstand vibrations, subsidence, impacts or brief pressures of up to 150 kPa (1.5 bar) DN 30-150 without breaking or permanent deformation. The material used, polyethylene, is environmentally friendly and completely recyclable. No toxic emissions are produced during processing or in the event of a fire.

Geberit PE pipes are available in dimensions from DN 30 to DN 300 and with a wide range of fittings. Geberit PE pipes and fittings made of polyethylene meet the requirements of DIN EN 12056 in conjunction with DIN 1986-100, as well as DIN EN 752. The Geberit PE drainage system is for installation inside buildings in accordance with DIN 19535 and DIN EN 1519 and for underground pipes in accordance with DIN EN 12 666-1 approved. Geberit is adapting the designation of the pipe diameter to the requirements of the EN standards. In the past, the nominal diameter DN was used to denote the inner diameter of the pipes. According to the standard, the new nominal size DN approximates the outside diameter of the pipes and fittings.

Material: PE-HD

Linear expansion coefficient: 0.17 mm / (m K)

Absorption of linear expansion: Requires long socket

Installation temperature: -20 to 40 ° C

Application temperature continuous load: -20 to 80 ° C

Chemical resistance: 95% of all commercially available alkalis, acids and chemicals

Source: Geberit Vertriebs GmbH

柔性管道连接
CRA10001
管道减小器 CGA 43 | 32
43 mm | 32 mm
直到 0.5 bar / 7.3 PSI
CRA10002
管道减小器 CGA 43 | 40
43 mm | 40 mm
直到 0.5 bar / 7.3 PSI
CRA10003
管道减小器 CGA 45 | 32
45 mm | 32 mm
直到 0.5 bar / 7.3 PSI
CRA10004
管道减小器 CGA 45 | 40
45 mm | 40 mm
直到 0.5 bar / 7.3 PSI
CRA10094
管道减小器 CGA 70 | 50
70 mm | 50 mm
直到 0.5 bar / 7.3 PSI
CRA10005
管道减小器 CGA 73 | 50
73 mm | 50 mm
直到 0.5 bar / 7.3 PSI
CRA10096
管道减小器 CGA 83 | 50
83 mm | 50 mm
直到 0.5 bar / 7.3 PSI
CRA10098
管道减小器 CGA 96 | 50
96 mm | 50 mm
直到 0.5 bar / 7.3 PSI
CRA10106
管道减小器 CGA 100 | 50
100 mm | 50 mm
直到 0.5 bar / 7.3 PSI
CRA10012
多管道减小器 CKA 64/58 | 50/40
64 / 58 mm | 50 / 40 mm
直到 0.5 bar / 7.3 PSI
CRA10013
多管道减小器 CKA 75/70 | 50/40
75 / 70 mm | 50 / 40 mm
直到 0.5 bar / 7.3 PSI
CRA10016
多管道减小器 CKA 96/83 | 75/50
96 / 83 mm | 75 / 50 mm
直到 0.5 bar / 7.3 PSI
CRA10017
多管道减小器 CKA 100-105 | 75/50
100-105 mm | 75 / 50 mm
直到 0.5 bar / 7.3 PSI
CRA12044
适配器耦合 CAC 0501
40-50 mm | 24-32 mm
直到 0.6 bar / 8.7 PSI
CRA12029
适配器耦合 CAC 0562
48-56 mm | 38-43 mm
直到 0.6 bar / 8.7 PSI
CRA12047
适配器耦合 CAC 0633
53-64 mm | 40-50 mm
直到 0.6 bar / 8.7 PSI
CRA12031
适配器耦合 CAC 0923
82-92 mm | 48-56 mm
直到 0.6 bar / 8.7 PSI
CRA12041
适配器耦合 CAC 1225
110-122 mm | 48-56 mm
直到 0.6 bar / 8.7 PSI
CRA14023
标准耦合 CDC 050
40-50 mm
直到 0.6 bar / 8.7 PSI
CRA14045
标准耦合 CDC 056
48-56 mm
直到 0.6 bar / 8.7 PSI
CRA14024
标准耦合 CDC 065
50-65 mm
直到 0.6 bar / 8.7 PSI
CRA14033
标准耦合 CSC 065
50-65 mm
直到 2.5 bar / 36.3 PSI
CRA12041FKM
适配器耦合 CAC 1225 FKM
110-122 mm | 48-56 mm
直到 0.6 bar / 8.7 PSI
CRA14023FKM
标准耦合 CDC 050 FKM
40-50 mm
直到 0.6 bar / 8.7 PSI
CRA14024FKM
标准耦合 CDC 065 FKM
50-65 mm
直到 0.6 bar / 8.7 PSI
CRA12037
适配器耦合 CAC 1153
100-115 mm | 50-64 mm
直到 0.6 bar / 8.7 PSI
CRA12034
适配器耦合 CAC 1152
100-115 mm | 40-50 mm
直到 0.6 bar / 8.7 PSI
CRA12026
适配器耦合 CAC 0893
75-90 mm | 40-50 mm
直到 0.6 bar / 8.7 PSI
CRA12024
适配器耦合 CAC 0651
50-65 mm | 35-42 mm
直到 0.6 bar / 8.7 PSI
CRA12023
适配器耦合 CAC 0502
40-50 mm | 32-40 mm
直到 0.6 bar / 8.7 PSI
CRA14033FKM
标准耦合 CSC 065 FKM
50-65 mm
直到 2.5 bar / 36.3 PSI
特殊产品
CRA15070
灵活的分支 CFA 050 (40-50, 1 1/2'')
40-50 mm
直到 0.6 bar / 8.7 PSI
CRA15071
灵活的分支 CFA 060 (50-60, 2'')
50-60 mm
直到 0.6 bar / 8.7 PSI
CRA15066
灵活的弯曲 CFB 050 (90°, 40-50, 1 1/2")
40-50 mm
直到 0.6 bar / 8.7 PSI
CRA15067
灵活的弯曲 CFB 060 (90°, 50-60, 2'')
50-60 mm
直到 0.6 bar / 8.7 PSI
CRA15083
外部端盖 CEC 050
43-50 mm
直到 0.6 bar / 8.7 PSI
CRA15757
外部端盖 CEC 056
45-56 mm
直到 0.6 bar / 8.7 PSI
CRA18647
内部端盖 CSV 50 PVC
37-54 mm | 1/2 mm
直到 0.5 bar / 7.3 PSI
CRA18619
内部端盖 CSV 50
37-48 mm | 1/2 mm
直到 0.5 bar / 7.3 PSI

重要的: 本网站上提到的所有品牌名称和商标均为各自所有者的财产。提及这些名称和标识仅用于信息目的,并不意味着与相关制造商有任何合作或合作伙伴关系(名义使用)。提供的信息和描述仅供概览,并不构成具有约束力的产品建议或推荐。尽管经过仔细研究,但不对内容的完整性、准确性或及时性作出任何保证。此处展示的所有图像(产品图片、图形等)均由 Crassus GmbH & Co. KG 自行创作或为演示目的而重新制作。它们可能与原始产品有所不同。对于因使用或未使用所提供的信息或因使用不正确或不完整的信息而导致的物质或非物质损害,不承担任何责任。如果制造商的文字或信息以我们自己的语言进行概述或引用,则会以尊重相关权利持有者版权的方式进行。再次使用此处发布的内容需征得我们的明确同意,并在必要时获得相关权利持有者的许可。