| Catégorie de matériau | Plastique / Matière plastique |
| RXNR | 69-1-S |
| Désignation | Karl Schöngen - Concept-HL jacking pipe MV PP-HM for wastewater |
| Fabricant | Karl Schöngen KG |
| DN | 110 |
| Extrémité du tuyau | Extrémité pointue |
| Nom du matériau | PP-HM |
| Couleur (extérieure) | Vert |
| Domaines d'application | Génie civil, Drainage |
| ID (mm) | 97.6 |
| Dext (mm) | 110 |
| Épaisseur de paroi (mm) | 6.2 |
|
Sewage pipe made of filler-free polypropylene with a higher modulus of elasticity (PP-HM). Design MV with smooth inside and outside, integrated into the pipe wall, push-in socket connection with 2 firmly fixed sealing rings. Tube color: green (easy to inspect). With DIBt approval Z-42.1-349, material according to DIN EN 1852-1, proof of system tightness at higher internal pressure according to DIN EN 1277, therefore suitable for drinking water protection zones II and III. The pipes are high-pressure flush-proof, corrosion-resistant against municipal wastewater pH 2 to pH 12 and meet the requirements of DIN EN 476. Advantages: - high impact strength - High profitability - great rigidity and surface hardness - Absorption of extremely high axial pre-pressing forces - environmentally friendly, recyclable - Resistant to municipal sewage - The production of special lengths and special dimensions is possible Source: Karl Schöngen KG |
