Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	3-2-M
Designation	Ostendorf - KG2000 SN10
Manufacturer	Ostendorf
DN	110
Pipe end	Socket
Material name	Polypropylene
Color (exterior)	Green
Applications	Civil Engineering, Drainage, Industry

ID (mm)	110
OD (mm)	130
Wall thickness (mm)	3.4

KG2000 pipes and fittings are produced in accordance with DIN EN 14758-1 and based on DIN EN 1852-1 plastic piping systems for underground sewers and sewer pipes made of polypropylene (PP). The general requirements for pipes and fittings for buried sewers and sewer lines of DIN EN 476 as well as the general quality requirement of DIN 8078 are used as a basis for the manufacture of the pipes and fittings. The pipes are resistant to common waste water (pH2 – pH12). In special cases, the chemical resistance can be found in DIN 8078. KG 2000 can only be connected to one another via plug connections (with a patented sealing ring pre-assembled at the factory) or Crassus adapters and are available up to DN 500 (lengths from 500 to 6000 mm).

Source: Gebr. Ostendorf Kunststoffe GmbH & Co. KG

Flexible pipe connections

CRA10009

Pipe Reducer CMA 110 | 90 (Black)

110 mm | 90 mm

up to 0.5 bar / 7.3 PSI

Special products

CRA18624

Inside End Cap CSV 100

94-110 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

CRA18625

Inside End Cap CSV 114

108-120 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

CRA18641

Inside End Cap CSV 100 PVC

95-110 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.