Anger - UltraSolid PP SN16
Unfortunately, you cannot purchase this item from us.
Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension
Pipe end
Properties
Material category Plastic
RXNR 145-3-S
Designation Anger - UltraSolid PP SN16
Manufacturer Anger Systemtechnik GmbH
DN 160
Pipe end Spigot
Material name Polypropylen-Blockcopolymer
Color (exterior) Orange
Applications Drainage
Dimensioning
ID (mm) 145.4
OD (mm) 160
Wall thickness (mm) 7,3
Description
Das Anger UltraSolid® PP SN12/16 ist ein nach DIN EN 1852 hergestelltes hochbelastbares Vollwandrohrsystem mit bewährter Rohrgeometrie. Für die Herstellung der Rohre und Formteile kommt ausschließlich füllstofffreies, hochfestes Polypropylen-Blockcopolymer zum Einsatz.

Mit den verfügbaren Dimensionen von DN/OD 110 bis 630 für das Rohr als auch für die Formteile steht Ihnen ein umfangreiches System für einen kompletten Kanalnetzaufbau zur Verfügung. In Kombination mit unseren seit Jahrzehnten im Markt etablierten Schachtsystemen von DN 400 bis DN > 1000 bieten wir Ihnen ein Komplettpaket aus einer Hand an. Die in der DIN EN 1852 geforderte und in der Praxis bewährte farbliche Unterscheidung zwischen Schmutzwasser (orange, UltraSolid PP SN12/16) und Regenwasser (blau, UltraSolid Rain PP SN12/16) wurde durch eine komplette Durchfärbung der UltraSolid-Rohre und Formteile kompromisslos übernommen. Somit ist die eindeutige Identiizierung auch nach der Verlegung bei einer Kamerabefahrung sichergestellt.

Die solide Wandung des UltraSolid ist auf höchste Belastungen ausgelegt und wirkt unterstützend bei der Verlegung.

DER WERKSTOFF

Für die Produktion des UltraSolid-Vollwandrohres wird ausschließlich ein hochfestes, sortenreines Polypropylen-Blockcopolymer verwendet. Dieser Werkstoff hat sich durch seine hohe chemische Beständigkeit und seinen großen Temperatureinsatzbereich von –20°C bis +90°C in der Praxis bestens bewährt. Der Einsatz der verwendeten füllstofffreien Neuware mit ihrem sehr hohen E-Modul macht das UltraSolid extrem haltbar, sodass die Nutzungsdauer des UltraSolid auf 100 Jahre ausgelegt werden konnte.

RECYCLING

Die Reinheit des verwendeten füllstofffreien Werkstoffes garantiert die 100%-ige Recyclingfähigkeit in
ferner Zukunft.

WANDAUFBAU

Im Gegensatz zu Mehrschichtrohren und gefüllten Rohren wird das UltraSolid ausschließlich aus einem Werkstoff gefertigt und bietet einen soliden Vollwandaufbau.

DIE DICHTSYSTEME
Durch die gespritzte Doppelmuffe, die ab Werk auf den UltraSolid-Kanalrohren angebracht ist, liegt die Dichtung sicher in einer Sicke mit sehr engen Toleranzen. Zusammen mit dem UltraSafe-Dichtsystem, bei dem die Dichtung zusätzlich durch einen formschlüssigen Sicherheitsring gegen herausschieben gesichert ist, entsteht eine wurzelfeste Verbindung. Die Dichtheit dieser Verbindung, von über 2,5 bar, ist auch bei hoher Belastung sichergestellt. Bei einigen Formteilen erfolgt die Ausschubsicherung des Dichtringes durch einen integrierten Stützring.

Quelle: Anger Systemtechnik GmbH
Flexible pipe connections
CRA10006
Pipe Reducer CGA 150 | 110
150 mm | 110 mm
up to 0.5 bar / 7.3 PSI
CRA10007
Pipe Reducer CGA 178 | 160
178 mm | 160 mm
up to 0.5 bar / 7.3 PSI
CRA12062
Adaptor Coupling CAC 1602
144-160 mm | 110-122 mm
up to 0.6 bar / 8.7 PSI
CRA12063
Adaptor Coupling CAC 1603
144-160 mm | 121-136 mm
up to 0.6 bar / 8.7 PSI
CRA12065
Adaptor Coupling CAC 1702
155-170 mm | 110-125 mm
up to 0.6 bar / 8.7 PSI
CRA17411
Adaptor Coupling CAC 1703
155-170 mm | 130-145 mm
up to 0.6 bar / 8.7 PSI
CRA17417
Adaptor Coupling CAC 1924
170-192 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA12036
Adaptor Coupling CAC 1500
170-191 mm | 160-170 mm
up to 0.6 bar / 8.7 PSI
CRA17421
Adaptor Coupling CAC 2001
180-200 mm | 155-170 mm
up to 0.6 bar / 8.7 PSI
CRA17034
Adaptor Coupling CAC 6000
180-200 mm | 160-180 mm
up to 0.6 bar / 8.7 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 160-180 mm
up to 0.6 bar / 8.7 PSI
CRA17182
Adaptor Coupling CAC 2154
190-215 mm | 150-165 mm
up to 0.6 bar / 8.7 PSI
CRA17183
Adaptor Coupling CAC 2254
200-225 mm | 160-175 mm
up to 0.6 bar / 8.7 PSI
CRA17186
Adaptor Coupling CAC 2354
210-235 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17189
Adaptor Coupling CAC 2654
240-265 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17194
Adaptor Coupling CAC 2754
250-275 mm | 160-175 mm
up to 0.6 bar / 8.7 PSI
CRA17196
Adaptor Coupling CAC 2904
265-290 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17200
Adaptor Coupling CAC 3204
295-320 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA14032
Drain Coupling CDC 170
150-170 mm
up to 0.6 bar / 8.7 PSI
CRA16202
Drain Coupling CDC 175
160-175 mm
up to 0.6 bar / 8.7 PSI
CRA14041
Standard Coupling CSC 165
140-165 mm
up to 2.5 bar / 36.3 PSI
CRA14042
Standard Coupling CSC 170
150-170 mm
up to 2.5 bar / 36.3 PSI
CRA16216
Standard Coupling CSC 185
160-185 mm
up to 2.5 bar / 36.3 PSI
CRA11023
Plug Adaptor CSA 150
150-168 mm | 145-157 mm
up to 0.5 bar / 7.3 PSI
CRA12062FKM
Adaptor Coupling CAC 1602 FKM
144-160 mm | 110-122 mm
up to 0.6 bar / 8.7 PSI
CRA12063FKM
Adaptor Coupling CAC 1603 FKM
144-160 mm | 121-136 mm
up to 0.6 bar / 8.7 PSI
CRA17417FKM
Adaptor Coupling CAC 1924 FKM
170-192 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA14032FKM
Standard Coupling CDC 165 FKM
140-165 mm
up to 0.6 bar / 8.7 PSI
CRA14041FKM
Standard Coupling CSC 165 FKM
140-165 mm
up to 2.5 bar / 36.3 PSI
CRA16216FKM
Standard Coupling CSC 185 FKM
160-185 mm
up to 2.5 bar / 36.3 PSI
CRA14056
Drain Coupling CDC 165
140-165 mm
up to 0.6 bar / 8.7 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17191
Adaptor Coupling CAC 2656
195-220 mm | 155-170 mm
up to 0.6 bar / 8.7 PSI
Special products
CRA15079
Outside End Cap CEC 165
155-165 mm
up to 0.6 bar / 8.7 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.