Press Seal CMS-E
Custom made
Core drill hole Ø ID
Pipes / Cables Ø OD (custom-made)
Material
Product information
Article group Press Seal CMS-E
Item number CRA21191V2A Custom made
EAN / GTIN 4260391372421
Designation Press Seal Type CMS30-E, DN 50mm for OD 0-25mm
Product description Split eccentric passage with freely selectable sizes: for installation in core bores or casing pipes; for the passage of different media (pipes, cables, etc.); resistant to pressurized and non-pressurized water; welded bolts for optimal stability and corrosion protection; UV and weather-resistant material.
Dimensioning
A | Core drill hole 50 mm
B | Pipes / Cables ø 0-25 mm
L | Seal 30 mm
Specification
Pressure density 5.0 bar / 72.5 PSI
Weight variable
Testing / Approval
MPA
Resistances
UV resistant
Suitable for soil
Flush-mounting suited
Material
EPDM
Ethylene Propylene Diene Rubber (EPDM) is a synthetic rubber. The saturated backbone structure results in properties such as high UV and weather resistance, as well as high thermal resistance.
Stainless steel (AISI 304)
V2A (1.4301, AISI 304) is an austenitic, acid-resistant 18/10 Cr-Ni steel that is intergranularly resistant even after welding without subsequent heat treatment due to its low carbon content.
Suitable for all media pipes and cables
The Press Seal is suitable for all media pipes and cables (in the respective diameter and under considering the respective specification).
Against pressing water
The product is resistant to pressing and non-pressing water.
Improved stability through welded-on bolts
Our Press Seals are extremely robust because the bolts are not pushed through but welded directly onto the main plate.
Gas, odor, and water tight
The seal is both gas, odor, and water tight.
For horizontal and vertical installation.
The product is suitable for a horizontal or vertical installation.
UV, ozone and weather resistant.
The product is UV and ozone resistant as well as suitable for all weather conditions.
Suitable for flush-mounting.
The product is suitable for concealed installation (flush-mounting).
Suitable for soil.
The product is suitable for installation in the ground.
Digital product and function overview.
This product has a scannable QR code to call up all relevant product information and functions.
Problem
Step 1/4
Step 2/4
Step 3/4
Step 4/4
Downloads for the product
Data Sheet
Tender texts for planners