Suitable for all wastwater pipes
Minimal reduction path
Perforated breaking points
Easy installation without any tools
Acoustic decoupling function
UV-resistant, suitable for soil and flush-mounting
Pay attention to flow direction!
The Multi Pipe Reducer are always rolled or torn off before installation
Figure   |
Item number |
A | Size range (mm) |
B | Size range (mm) |
L | Length (mm) |
Material |
Pressure-tight (bar) |
Tightening torque (Nm) |
Data sheet |
---|---|---|---|---|---|---|---|---|
![]() |
CRA10011 | 50 | 40 / 32 | 62 | TPE | 0.5 | - | |
![]() |
CRA10012 | 64 / 58 | 50 / 40 | 80 | TPE | 0.5 | - | |
![]() |
CRA10013 | 75 / 70 | 50 / 40 | 92 | TPE | 0.5 | - | |
![]() |
CRA10016 | 96 / 83 | 75 / 50 | 98 | TPE | 0.5 | - | |
![]() |
CRA10017 | 100-105 | 75 / 50 | 64 | TPE | 0.5 | - | |
![]() |
CRA10014 | 100-105 | 90 / 75 | 65 | TPE | 0.5 | - | |
![]() |
CRA10015 | 123-130 | 110 / 75 | 68 | TPE | 0.5 | - | |
![]() |
CRA10107 | 150 / 125 | 110 | 115 | EPDM | 0.5 | - |
You have to connect two sewer pipes (different size and / or material) with an inside adaptor in various variants. For example the Crassus Multi Pipe Reducer CKA 75/70 | 50/40.
Remove the upper part. Turn the bottom part to the outside for example SML DN 80 to HT DN 50.
Push the multi pipe reducer into the pipe with the larger diameter (SML DN 80).
Now you can push the pipe with the smaller diameter (HT DN 50) into the multi pipe reducer.
In this example you created a reliable and watertight connection between an SML DN 80 and HT DN 50 pipe.
Filetype and name | Size |
---|---|
![]() |
1.31 MB |
![]() |
0.06 MB |